EVDO Direct Connect Amplifier (3 Watt) with AC Adapter [AM-DC-B] - $289.95 : 3Gstore.com, Verizon & Sprint EVDO Modems, Antennas, Amplifiers, Routers
Home |  Log In
 
3GStore.com - Home of the EVDO Experts - One-stop source for sales and support of Verizon / Sprint / Alltel EVDO devices and service! Toll Free: (866) 347-8673
Open Mon-Fri: 9AM-7PM Central

Product 5/11

Previous
Return to the Product List
Next

EVDO Direct Connect Amplifier (3 Watt) with AC Adapter

$289.95

Compatible with all Cellular/PCS Carriers and technology (GSM, GPRS, EDGE, CDMA, EVDO, EV-DO, TDMA, AMPS/Analog) except iDEN (Nextel)

Are you stuck in a weak EVDO coverage area or traveling in a vehicle and always want the most signal that is possible? A good antenna is a must, but if you want the best possible EVDO signal, a direct connect signal amplifier is the answer. A direct connect signal amplifier plugs in between your external antenna and your EVDO device. The amp requires AC or DC power and ours includes both adapters.

What is included in our package:
  • 3 Watt Bi-Directional Dual-Band (800MHz/1900MHz) Amplifier with 12v/Cigarette Lighter Adapter
  • AC Power Adapter - for inside use (amp is not for outdoor/exposed use)
  • 6 foot cable for use with all of our antenna adapters (extends the distance the amplifier can be from the EVDO device)

Features:
  • Maximum 3 Watts Output Power on 800MHz
  • Maximum 2 Watts Output Power on 1900MHz
  • Compatible with all Cellular/PCS Carriers and technology (GSM/GPRS, CDMA, TDMA, AMPS/Analog) except iDEN (Nextel, Southern LINC, Mike)
  • Passes TIA/EIA-98-E transmit tests for evaluating CDMA Cellular Phones
  • Power Control Logic ensures Maximum Output Power is within Cellular Standards
  • Automatic Gain Control
  • FCC Type Accepted
  • Manufactured and Made in the USA by Wilson Electronics
  • For Mobile, Marine or Fixed/In-Building Use
Specifications:
  • Frequency: 824 MHz-894 MHz, 1850-1990Mhz band
  • Gain: Cell Site Controlled, Max 10/10
  • Max Output Power: up to 3 watts (Cell Site Controlled)
  • Max RF: +35 dBm / +5 dBm
  • Noise Figure: 3.5 dB nominal
  • Flatness: ±2 dB / ±2 dB
  • Isolation: 90 dB
  • Power Requirements: 12V, 0.5-1.5A (subject to uplink power)
  • Connectors: FME-Male 50 ohms
  • Dimensions: 5.5 x 4.3 x 1.4 (inches) or 14.0 x 10.8 x 3.5 (cm)
  • Weight: 1.32 lbs or 0.6 kg

Requirements:


Add to Cart:

  • Shipping Weight: 3lbs
  • Manufactured by: Wilson Electronics
 | Home | 
Visit our other sites at EVDOinfo.com :: EVDOforums.com