Please Wait...
1-866-347-8673
LiveChat
Log In
Helping You Stay Connected

Now offering $4.99 Shipping!

(orders over $99 - see details)

Information and Accessories for ARC MBR1400LP-AT Embedded 3G/4G Router on AT&T

About the ARC MBR1400LP-AT Embedded 3G/4G Router

ARC MBR1400LP-AT Embedded 3G/4G Router

MBR1400 Features:

  • Targeted for retail locations, branch offices, or small and medium sized businesses
  • Load balance multiple data modems or wired data services
  • Compatible with Cisco, Juniper, and other industry-leading network hardware providers
  • Enhanced performance around walls and other obstructions
  • Dual-Band WiFi broadcast - either 2.4GHz or 5.0GHz (using the 5.0ghz frequency requires 5.0ghz-capable WiFi antennas, sold separately)
  • Maximum security with both Public and Private networks
  • Dual-band WiFi, 3x3 MIMO Antenna Subsystem, removable external antennas (the WiFi antenna jacks are RP-SMA/Female), dual SSIDs
  • Plug-and-Play support for over 120 broadband data modems, allowing for site-specific carrier/ service selection for broadest deployment
  • Standardized platform and centralized remote management
  • Up to 20 concurrent VPN endpoint sessions
  • Compatible with Cisco, SonicWall, and other VPN termination systems
  • Establish continuous uptime with optimum total cost of ownership for broad deployment
  • Supports enterprise routing protocols: BGP, OSPF, and RIP; VRRP for router redundancy; and STP (hardware V2 only)
  • Simple to install, configure and maintain with minimal impact on IT
  • Captive portal/walled garden - download the "captive portal" feature overview (pdf)

Cradlepoint MBR1400 Specifications:

  • Ports
    • Two ExpressCard and three USB 2.0 for 4G/3G modems (the modem cap BLOCKS the ExpressCard slots and two of the USB ports - if you are using the modem cap, only ONE USB port will be accessible)
    • Five configurable 10/100/1000 Ethernet LAN/WAN ports (default 1 WAN, 4 LAN)
  • WiFi
    • 802.11n 3x3 MIMO with support for legacy 802.11 b/g
    • 2 SSIDs to support multiple users or QoS categories
    • Switchable 2.4/5GHz radio configuration (802.11a for 5.0GHz) (using the 5.0ghz frequency requires 5.0ghz-capable WiFi antennas, sold separately)
    • Supports up to 128 concurrent users
    • WiFi-as-WAN
  • WiFi Security
    • WEP (64/128bit, only for b/g)
    • WPA/WPA2 (AES) - Personal and Enterprise
    • 802.11 Authentication
    • WiFi Protected Setup
    • SSID broadcast disable
    • Captive Portal Option
  • WAN Connection Types
    • Static IP, DHCP, PPPoE, Cellular Modem PPP Authentication, Sprint MPLS
  • WAN Redundancy and Load Balancing
    • Failover/Failback (4G/3G/Ethernet)
    • Load Balancing
    • WAN failure Detection via Ping (Ethernet)
    • VRRP
  • WAN Security
    • NAT, SPI, ALG, Inbound Filtering of IP Addresses, Port Blocking, Service Filtering (FTP, SMTP, HTTP, RPL, SNMP, DNS, ICMP, NNTP, POP3, SSH)
    • Protocol Filtering
    • WAN ping (allow/control)
  • Intelligent Routing
    • UPnP
    • DMZ
    • Virtual server/port forwarding
    • Routing rules
    • NAT-less routing
    • Wired or wireless WAN-to-LAN IP passthrough
    • Route management
    • Per-interface routing
    • Content filtering
    • IP filtering
    • Website filtering
    • Per-client Web filtering
    • Local DHCP server, DHCP client, DHCP relay
    • DNS, DNS proxy
    • ALGs: PPTP, L2TP, PPPoE passthrough, IPsec passthrough, FTP (passive), FTP (active), SIP, TFTP, IRC
    • MAC address filtering
    • Dynamic DNS, LAN/WAN affinity
    • VLAN support (802.1Q)
    • STP
    • Enterprise routing protocols: BGP/OSPF/RIP, multicast proxy support,* IP setting overrides
  • Management
    • HTTP, HTTPS (Remote Management)
    • Web-Based GUI (Easy Management)
    • User Help Screens with Web GUI
    • One Button Firmware Upgrade, and Firmware Upgrade via USB
    • Server-based Centralized Management (WiPipe Central)
    • WAN (remote) Web-based Management Access
    • Modem Configuration and Management
  • VPN
    • Device to CradlePoint, Cisco/Linksys, Linux Systems
    • Transfer Modes
    • Hash (MD5, SHA128, SHA256, SHA384, SHA512)
    • Cipher (AES, 3DES, DES)
    • Support for 20 Connections
    • GRE Tunneling
  • Performance Management
    • WAN Connection Types WiPipe™ QoS with Traffic Shaping, SSID based priority, WAN port speed control, Multicast Stream enable/disable
  • Environmental
    • Temperature: 0 to 40ºC (32 to 104ºC), operating; -20 to 70º C ( -4 to 158º F), storage
    • Relative Humidity: 10% to 85%, operating; 5% to 90%, storage
  • Size
    • Dimensions: 230 x 130 x 40 mm / 9 x 5.1 x 1.57 inches
    • Weight: 1.04 lbs
  • Package Contents
    • MBR1400 Gigabit Router
    • AC/DC Power Supply
    • Ethernet Cable & Mounting Screws
    • Quick Start Guide with Warranty Information
    • Three Removable High-Gain External 2.4GHz WiFi Antennas

AT&T Modem Cap Specifications:

  • Technology: LTE/HSPA+ modem backwards compatible to  GSM/GPRS/EDGE
  • Downlink Rates: LTE 100 Mbps, HSPA+ 21.1 Mbps (theoretical)
  • Uplink Rates: LTE 50 Mbps, HSPA+ 5.76 Mbps (theoretical)
  • Frequency Band: LTE Band 13 (700MHz) , Band 4 (AWS) UMTS/HSPA+ (850/1900/2100 MHz) EDGE/GPRS/GSM (850/900/1800/1900 MHz )
  • Module Power: LTE 23 +/-1dBm, UMTS 23 +/-1dBm (typ conducted)
  • Module: Sierra Wireless MC7700
  • SIM slot: Standard (if you plan to use a microSIM, you'll need the micro-to-standard SIM adapter)
  • Antennas: Two SMA male (plug; jack is female), 1 dBi (LTE), 2 dBi (Cellular/PCS) gain. w/ support for GPS on Aux connection, finger tighten only.
  • GPS: standalone GPS support
  • Industry Standards & Certs: PTCRB, FCC, 802.3, plus carrier specific certifications
  • Modem Certification Model Number: MC200LP
  • Modem Certification Part Number: MC200LP-AT
  • Minimum Requirements: SIM card with active 3G/4G mobile broadband plan from AT&T

Antenna Port Location

The modem cap's antenna connectors are SMA/Female. If you are using an antenna with an SMA/Male connector, simply screw it directly onto the connector. If you are using an antenna with a cable terminated in FME/Female, attach the 971119 FME/Male to SMA/Male connector onto the end of your antenna cable and then you will be able to screw your cable into the modem cap (pictured here). If you are using a cable with an N/Male connector, you will either need TWO connectors (N/Female to FME/Female and then FME/Male to SMA/Male) OR you can use the RSA-3452 N/Female to SMA/Male connector.

Tips For Using Your Antenna/Adapters:

  • You do NOT need to replace both antennas - you can continue to use one of the stock antennas replace just one if you prefer.
  • If you're using a 4G-capable modem cap, remember that boosting 4G signal requires a 4G-capable antenna. Not all antennas will boost 4G!
  • If you're using a magnetic mount antenna, make sure it is connected to something magnetic or it will not work! If you're using an antenna that included radials, make sure the radials are screwed on or it will not be as effective! (other antennas do not require grounding)
Purchase Cradlepoint ARC MBR1400 w/ AT&T 3G/4G. Already have an antenna/amplifier and just need the adapter cable?

Powered by Olark