Please Wait...
1-866-347-8673
Log In
Helping You Stay Connected

Now offering $4.99 Shipping!

(orders over $99 - see details)

AirCard USB 306 on Telus

AirCard USB 306

Single System Requirements

  • USB Port 2.0
  • System: Pentium 150 MHz or higher
  • Memory: 32 MB
  • Disk Space: 32 MB

Dimensions

  • 65 mm (L) x 25 mm (W) x 13.5 mm (H)
  • Volume: 19.5 cc
  • Weight: 30 g

Technical Specifications

Technology:

  • USB Modem (USB Port) MDM 8200 UMTS with HSDPA Category 14 (21.1 Mbps downlink)*
  • HSUPA Category 6 (5.76 Mbps uplink)*
  • EDGE MS Class 12/GPRS MS Class 10
  • microSD / SDHC support

Bands:

  • USB 306: 850, 1900, 2100 MHz WCDMA
  • Power: Class3
  • Quad Band GSM/GPRS/EDGE:
  • 850/900/1800/1900MHz
  • Antenna Diversity Support: 800/850, 1900, 2100 MHz

Operating System Support

Windows® 7, Vista, XP, or Mac OS X 10.4.11 or later

Antenna Port Location

Tips For Using Your Antenna/Adapter Cable:

  • Your antenna port may be under a plastic cover or a rubber plug (which can be pried up with something like a pen or bent paperclip) or you may need to remove the back plate or battery door of your device to access it. If you cannot locate your antenna port, please contact us and we will help.
  • Be GENTLE when connecting or disconnecting the adapter cable to/from your device - the connector pins and the ports themselves can be VERY FRAGILE!!!
  • If the adapter cable feels loose when you connect it to the antenna port, remove it and roll it back and forth between your thumb and forefinger while applying medium pressure. The friction and pressure will cause the connectors' "teeth" to tighten up, allowing it to fit more snugly in your device's antenna port. The connection between some adapter cable/device combinations may continue to be loose, but that does NOT necessarily mean there is a problem - to confirm that the cable is making a successful connection to your device's antenna port, check your signal strength with and without the antenna connected (if you are seeing signal improvement, the adapter is connected properly).
  • If you're using a magnetic mount antenna, make sure it is connected to something magnetic or it will not work! If you're using an antenna that included radials, make sure the radials are screwed on or it will not be as effective! (other antennas do not require grounding)
Already have an antenna/amplifier and just need the adapter cable?