5 Foot RG-58 Cable (FME Male & FME Female Connectors) - 951101

This 5' RG-58 cable has an FME-Male connector on one side and FME-Female on the other side.

There are a number of applications for this cable, some of which may require special adapters/connectors to connect this cable to your equipment. Several popular uses for this cable, along with information about any connectors needed, are described below. If you aren't sure whether this cable is appropriate for your needs or whether you need additional connectors, please contact us.

• If you are using this cable as an extension for the Booster Antenna, Magnetic Mount Antenna, 32" Omni External Antenna, 21" Omni RV Antenna, or 18" Shorty RV Antenna, you do NOT need any additional adapters/connectors.


• If you are using this cable instead of the 25' cable we bundle with the 18" Building Mount Antenna, you do NOT need any additional adapters/connectors.


• If you are using this cable to connect the 301135 Panel Antenna or 301121 Dome Antenna to the 801245 SoHo amplifier, you will need the 971128 connector to connect this cable to the antenna (the other side will connect directly to the amp).


• If you are using this cable to connect the 301208 Desktop Antenna to the 801245 SoHo amplifier, you do not need any additional adapters/connectors.


• If you are using this cable to connect the Dual-Band Yagi, 1800-1990 MHz Yagi, or 806-939 MHz Yagi to an adapter cable or amplifier, you will need the 971128 connector to connect this cable to the antenna (the other side will connect directly to the adapter cable or amp)

Signal Loss

• 850MHz Attenuates signal approximately .6 dbm
• 1900MHz Attenuates signal approximately 1.1 dbm
• Approximately .5dbm is lost at each connection between 2 cables.
• To prevent excessive signal loss, this extender cable should NOT be daisy chained.
• Find the frequency used in your area here: http://www.wirelessadvisor.com