The Signalboost with Cradle is a powerful all-in-one kit that is typically suited for mobile users but can be used at home with an optional AC adapter. It's more powerful than the MobilePro and doesn't require permanent installation. The kit includes an amplifier, magnetic mount antenna, DC car charger, and cradle for your MiFi (or cell phone).
Pro's:
- More powerful than SignalBoost MP
- No installation required
- Cradle expands to fit MiFi or your cell phone (click here to see the MiFi in the cradle!)
- Can be used at home with optional AC adapter
- Cost: at $249.95 from 3Gstore.com, the SignaBoost with Cradle is a nice mid-priced option between the MobilePro and DT.
Con's:
- Boosts signal to only one device at a time (device must be in the cradle)
- If you want to use the SignalBoost with Cradle at home, you must purchase the AC adapter and note that the cable connecting the magnetic mount antenna to the amplifier is only 10' (that is plenty of length for mobile use, but may not be ideal for home use).
Bottom Line: Mobile users looking for a more powerful option than the MobilePro will love the SignalBoost with Cradle, and the option of adding the AC adapter makes using it at home a possibility too. Unlike most repeaters, though, this kit can only provide a boost to ONE device at a time (whichever device is in the cradle), so if you're hoping to boost the signal to your MiFi and cell phones at the same time, this would not be the best option.
This specially packaged kit includes the Wilson Cellular 811210 Signal Boost Amplifier as well as the Magnetic mount exterior antenna (301103) and Wilson Cellular Cell Phone Cradle Plus.
The Wilson Cellular SIGNALBOOST (inline) Bi-directional Amplifier improves RF coverage in areas with no signal or low signal strength. The unit amplifies both 800MHz and 1900MHz cellular and PCS signals providing up to 3 Watts of output power on the 800MHz band and 2 Watts of output power on the 1900MHz (PCS) Band.
Features:
- Dual band - Cellular and PCS. 800Mhz and 1900Mhz
- Requires no physical connection -- Mifi rests in included cradle
- Significantly improves signal quality
- allows for more mifi battery life in weak signal areas
- Up to 3 watts maximum output power
- Power control logic ensures maximum output power is within cellular standards
- protects cell sites from harmful interference
- Can be Used in a Fixed or Mobile Application
- FCC and IC Type Accepted
How the unit functions:
The 800MHz and 1900MHz cellular signal from the cell site is received by the Magnetic mount exterior antenna (301103). The signal is then amplified and transmitted to your MiFi through the included Wilson Cellular Cell Phone Cradle Plus. When the MiFi transmits back to cell tower, the signal is amplified and sent to the cell site through the outside magmount antenna.
Compatible with:
MiFi 2200 for Sprint or Verizon
Includes: (see photo of contents below)
- 811210 Bi-Directional Dual-Band (800MHz/1900MHz) 3-watt Wireless Amplifier
- Magnetic mount exterior antenna (301103)
- Wilson Cellular Cell Phone Cradle Plus
- 12V DC Power Adapter -- (optional AC adapter for in-building use)
- Adhesive & air-vent brackets
- Earbud (to use your cell phone hands-free, which is necessary while its in the cradle)
Wilson 811214 Wireless Amplifier Specifications |
| Part Number |
|
811214 |
| Frequency |
|
824-894MHz; 1850-1990MHz |
| Gain (up/down) |
|
Cell Site Controlled |
| Max Output Power |
|
3 Watts |
| Max RF |
|
+35dBm / +33dBm |
| Noise Figure (down) |
|
3.5dB Nominal |
| Flatness |
|
2 dB / 2 dB |
| Isolation |
|
> 50 dB uplink/downlink |
| Power Requirements |
|
12V, 2A |
| Connectors |
|
FME Male, 50 Ohms |
| Dimensions |
|
5 x 3.5 x 1.2 (inches) 12.7 x 8.9 x 3 (cm) |
| Weight |
|
1.03 lbs / 0.468 kg |
PDF of installation instructions can be downloaded here
Google Products Ratings
EV SSL Enabled
Authorized Reseller
Online Authorized Reseller