20 Foot RG-58 Cable (FME/Female & N/Male Connectors) - 951104

This 20' RG-58 cable has an N-Male connector on one side and FME-Female on the other side.

This cable is typically used with Yagi antennas or for connecting the internal rebroadcasting antenna to a repeater system. Several popular uses for this cable, along with information about any connectors needed, are described below. If you aren't sure whether this cable is appropriate for your needs or whether you need additional connectors, please contact us.

• This cable is best suited for Yagi Antennas such as the 800Mhz - 2500Mhz Dual Band Yagi, the 1800 - 1990 Mhz Sprint Yagi and the 806 - 939 Mhz Yagi antennas to an adapter cable or Soho (801245), Direct Connect (811201) or In-vehicle (801201 or 811210) amplifier, yYou do NOT need any additional adapters/connectors to use the aforementioned Yagis with an adapter cable or any of the noted amplifiers.


• If you are using this cable to connect a 301135 Panel antenna or a 301121 Dome Antenna to a SoHo (801245) amplifier you do NOT need any additional adapters/connectors.


• We do not typically recommend this cable for other uses. If you are looking for an extension cable for an antenna with an FME connection, this cable will likely be a better solution for you.

Signal Loss

• 850MHz Attenuates signal approximately 2.6 dbm
• 1900MHz Attenuates signal approximately 4.4 dbm
• Approximately .5dbm is lost at each connection between 2 cables.
• To prevent excessive signal loss, this extender cable should NOT be daisy chained.
• Find the frequency used in your area here: http://www.wirelessadvisor.com