Fast Facts about this Product:
- This repeater kit is best for:
providing amplified signal to multiple cellular devices in a Small Office Home Office setting. Also a good option for larger RVs when used with directional panel as indoor antenna for adequate separation. This is NOT a kit - requires indoor and outdoor antennas and cabling (sold separately).
- All-in-One Kit? NO
- Range*: 5-7/10 (variable depending upon which interior transmit antenna is used)
- Model Name/Part Number: Wilson Cellular In-Building Wireless Dual-Band SOHO Cellular/PCS - 801245
- Restocking Fee: 20%
Before buying any signal boosting equipment for a fixed location (i.e. non-mobile applications), we strongly recommend doing a site survey first to determine whether an amplifier will help your signal and performance. If you are unsure of what you need, please contact us and we will be happy to help!
Detailed Description
The Wilson Electronics SOHO Wireless Dual-Band Amplifier has been carefully engineered to enhance the performance of your cell phone or cellular data card in small office/home office applications. Its advanced technology is designed to significantly improve voice and data signal quality and reduce disconnects and drop-outs. The amplifier works with two antennas (sold separately): one antenna communicates with the cell site (the outside antenna) and the other communicates with your cell phone or laptop data card (the inside antenna).
The outside antenna will collect the outside signal and send it through a cable to the amplifier. The signal is then boosted and sent through a cable to the inside antenna, which communicates with your cell phone or data card. When the cell phone or data card transmits, the inside antenna picks up the signal and sends it to the amplifier where it is boosted and sent through the outside antenna to the cell site.
The number of phones that can operate simultaneously on a wireless system depends on the outside signal strength. The stronger the outside signal is, the more phones an amplifier can support. Conversely, the weaker the outside signal is, the fewer phones an amplifier can support. Technical Support has never received a report of a system supporting too few phones.
Features:
- Supports US cellular & PCS frequencies (800/850MHz & 1900MHz). Does not
support N-E-X-T-E-L/I-den
- Works on all generations of CDMA, TDMA and GSM including 1xRTT, EVDO (EV-DO),
GSM, EDGE, UMTS, HSDPA and AMPS
- Automatic gain control to prevent signal oscillation
- Automatic shut down on overload
- Maximum +30dBm output power
- Receiver sensitivity -110dBm CDMA 1% FER
- FCC and IC (Industry Canada) type accepted
- Patent pending
Benefits:
- Designed specifically for small office and home office environments,
apartments, high rises, condominiums and dorm rooms.
- Greatly reduces signal disconnects and drop outs
- Significantly improves voice and data signal quality
- Has up to 10 times more power than your cell phone or laptop cellular
data card
- Receives and transmits better than a cell phone or cellular data card
- Improves data communication rates required for 3G technologies
- Allows multiple cell phones and cellular data cards to be used
simultaneously
- Extends battery talk and standby times
Requires:
- Full requirements are listed in this PDF installation manual
- Outside antenna: For maximum performance, it is highly
recommended that the outside antenna be located outside of the building
although under certain conditions the antenna may be located inside near a window.
- Inside antenna: The antenna that communicates with your cell
phone or cellular data card should be installed in the center of where the
signal needs to be amplified.
- Antenna separation: In order for your system to function properly, you must maintain adequate
separation between the interior and exterior antennas. This amplifier
requires a minimum of 20' of separation between the outside and inside antennas.
If a directional antenna is used for either the inside or outside antenna,
ensure that it is not pointed at the other antenna.
- IMPORTANT: The inside antenna must have a separation
of at least 8 inches from all persons during normal operation.
801245 Package Includes:
- #801245 SOHO wireless amplifier
- #859912 110-volt AC to 6-volt DC power supply. (#859913 - 12v cigarette lighter adapter available but not included)
- #971107 N Female - FME Female Connector (2 included in box. needed for ultra low loss 9913 cabling)
|
801145 SOHO Amplifier Specifications |
| Frequency |
824-894MHz & 1850-1990MHz |
| Gain |
50dB (both bands) |
| Max Output Power |
+30dBm |
| Max RF |
+30dBm/+10dBm |
| Noise Figure |
3dB/4dB nominal |
| Isolation |
> 90dB |
| Impedance |
50ohms |
| Noise Figure |
<9dB |
| Power Consumption |
120 VAC, 3A max |
| RF Connections |
Outside/Inside Antenna Port: FME/Male |
| Dimensions |
5.6 x 3.6 x 1.7 (inch) |
| Weight |
1.5lbs |
|
Approvals |
| FCC Approved |
FCC ID: PWO8012SM |
| IC Approved |
IC ID: 4726A-8012SM |
This product is subject to a 20% restocking fee. Please
click here to read our return policy.
* "Range" refers to the relative size of the area to which the repeater can provide boosted signal (1/10 is worst, 10/10 is best). Because of the many factors that can influence the range of a repeater system, we cannot guarantee specific ranges; the rating listed here is for comparative use only.
Frequently Purchased With This Item..
Google Products Ratings
EV SSL Enabled
Authorized Reseller
