[800/1900mhz] Wilson 3-Watt Dual-Band Direct Connect Amplifier w/ DC Power Supply - 811201

Fast Facts about this Product:

• This amplifier is best for: Providing the most signal possible to a single device that has an rf/antenna jack.
• All-in-One Kit? NO
• Range: N/A (amplifier must be directly connected to device)
• Model Name/Part Number: 811201
• Restocking Fee: N/A

---

Compatible with all Cellular/PCS Carriers and technology (GSM, GPRS, EDGE, CDMA, EVDO, EV-DO, TDMA, AMPS/Analog) except N-E-X-T-E-L/I-den)

Are you stuck in a weak coverage area or traveling in a vehicle and always want the most signal that is possible? A good antenna is a must, but if you want the best possible signal, a direct connect signal amplifier is the answer. A direct connect signal amplifier plugs in between your external antenna and your mobile broadband device. The amp requires AC or DC power and ours includes both adapters so you can use it anywhere from your desktop to your RV.

What is included in our package:

• PN 811201 -- 3 Watt Bi-Directional Dual-Band (800MHz/1900MHz) Amplifier with 12v/Cigarette Lighter Adapter (Note: the 811210 shipped by 3Gstore is the latest version available from Wilson Electronics)
• 6 foot cable for use with all of our antenna adapters (extends the distance the amplifier can be from the device)

Features:

• Maximum 3 Watts Output Power on 800MHz
• Maximum 2 Watts Output Power on 1900MHz
• Compatible with all Cellular/PCS Carriers and technology (GSM/GPRS, CDMA, TDMA, AMPS/Analog) except N-E-X-T-E-L/I-den
• Passes TIA/EIA-98-E transmit tests for evaluating CDMA Cellular Phones
• Power Control Logic ensures Maximum Output Power is within Cellular Standards
• Automatic Gain Control
• FCC Type Accepted
• Manufactured and Made in the USA by Wilson Electronics
• For Mobile, Marine or Fixed/In-Building Use

Specifications:

• Frequency: 824 MHz-894 MHz, 1850-1990Mhz band
• Gain: Cell Site Controlled, Max 10 dB / 14 dB
• Max Output Power: up to 3 watts (Cell Site Controlled)
• Max RF: +35 dBm / +15 dBm
• Noise Figure: 3.5 dB nominal
• Flatness: 2 dB / 2 dB
• Isolation: > 90 dB
• Power Requirements: 12V, 0.5-1.5A (subject to uplink power)
• Connectors: FME-Male 50 ohms
• Dimensions: 5.5 x 4.3 x 1.4 (inches) or 14.0 x 10.8 x 3.5 (cm)
• Weight: 1.32 lbs or 0.6 kg

Requirements:

• Any of our external antennas
• Proper antenna adapter cable
• 3G device with an external antenna port (Not sure where your device's antenna port is? Click here for to find your antenna jack)

811201