Full Band Outdoor Omni Antenna w/ cables for Verizon Home Phone Connect FT2260VW

This 9.5" omni antennas includes two lengths of 20' ultra low loss cable as well as the specific adapter needed for the Verizon Home Phone Connect (FT2260VW). When adding this antenna to your shopping cart the correct adapter will be added as well, along with a tip sheet. THE NECESSARY ADAPTER TO CONNECT TO YOUR FT2260VW IS AUTOMATICALLY ADDED TO YOUR SHOPPING CART WHEN YOU ADD THIS BOOSTER ANTENNA.

The Full Band Omni improves signal for voice and data (1xRTT, EVDO Rev-0, EVDO Rev-A, EDGE [AT&T 2G], HSPA [AT&T 3G], LTE [Verizon 4G], WiMAX [Sprint 4G]). The signal "gain" users see with the Full Band Omni is variable and dependent upon available signal in the area, interference, etc. Before buying any antenna, we encourage customers to read this article: Will an Antenna Help Me?.

This wall or roof mount antenna is ideal for downtown urban settings, RV’s or marine installations. It’s built with a strong fiberglass casing and is designed to cover 2G/3G/4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies. TWO 20' lengths of ultra low loss cable are included (one or both can be used).

Omni-directional antennas gather signal from all sides and this antenna does not need to be pointed toward the tower. For best results, the antenna should be mounted in an upright position. The CM288W Full Band Fiberglass antenna includes mounting equipment to mount to either a flat horizontal surface or a wall.

Features

• Supports Verizon 4G LTE!
• Omni Directional antenna
• Built-in ground plane
• Mounting hardware included

Included in this package:

• Cellphone-Mate CM288W Full Band Omni antenna
• Cable: this antenna is bundled with TWO 20' lengths of ultra low-loss cable. You may use one or both in your installation.
• Adapter for Verizon Home Phone Connect (FT2260VW)
• A tip sheet to help you get set up
• Mounting hardware

This antenna includes the mounting hardware as well as TWO 20' cables. The cable on the left in the above photo has an N-male connector on one side to connect to the antenna, and an FME female connector on the other. You can connect that cable directly to your adapter cable if 20' of cable is enough for your application, OR you can connect it to the FME male side of the second cable (shown on the right) for a total of 40' (the other side of the second cable is FME female, which will connect to your adapter cable).


close-up of the included mount and mounting hardware

Specifications

• Frequency Range: 698-960/1700-2700MHz
• Impedance: 50ohm
• Gain: 2-3dB at 698-960 MHz; 3-4dB at 1700-2700 MHz
• VSWR: ≤1.8
• Power Rating: 10
• Polarization Type: Vertical
• Radiation: Omni-directional
• Connector: N-Female
• Dimensions: 9.5” x 3.9”
• Color: White
• Operating Temperature: -22° F Degrees to +176° Degrees
• Mount: Mounts on roof or wall
• Cable: 2 x 20' ultra low loss cables included
• Beamwidth: E:72 H:92/ E:50 H:80
• Groundplane: Built-in ground plane
• Material: Fiberglass