Please Wait...
1-866-347-8673
LiveChat
Log In
Helping You Stay Connected

Now offering $4.99 Shipping!

(orders over $99 - see details)



Warning While Supplies Last!

Wilson 70dB Adjustable Gain Wireless Amplifier for Verizon 700 MHz 4G LTE - 801865 [700Vmhz ONLY]

In Stock

Item Number: 3343
Quantity:

Price:

$359.95

Sale Price:

$229.95

You Save:

$130.00

The yagi antennas REQUIRE line of sight to the tower (they will not work if you don't know where the tower is or if there are obstructions between you and the tower). The panel antenna is also a directional antenna and must be aimed towards the tower, but it does NOT require line of sight. If you are not sure where the cell tower is, you should choose one of the omnidirectional antennas (however, using an omnidirectional antenna will require more separation between your exterior and interior antennas, so make sure you purchase enough cabling and plan your installation accordingly)
Select External Antenna (required) - details
This cable will go between your outside antenna and the amplifier. Make sure you buy enough cable to accommodate your installation, keeping in mind the separation requirements for this amplifier!
Select Cable from Outside Antenna to Amp (required) - details
Select an inside antenna to rebroadcast the boosted signal. The DOME antenna mounts to a ceiling and provides an "omni" type of coverage area. The PANEL antenna can either be mounted on a ceiling facing downward (like the dome antenna) or on a wall facing outward (to direct signal in a certain direction). The panel antenna typically covers more area than the dome and is usually the better choice.
Select Inside Antenna (required) - details
This cable will go between the amplifier and your inside antenna. Make sure you buy enough cable to accommodate your installation, keeping in mind the separation requirements for this amplifier!
Select Cable from Amp to Inside Antenna (required) - details
A surge protector goes in between your outside antenna and the amplifier and protects your amplifier if lightning strikes your antenna. It's not required but is recommended for users in areas where lightning strikes frequently.
Add Lightning Protection (optional) - details

Fast Facts About This Product:

  • This amplifier is best for: Verizon 4G LTE users looking for a powerful wireless amplifier to provide boosted signal to multiple LTE devices in a large home/office and have the space to accommodate significant separation between the antennas (60' of separation between the external and internal antennas is recommended - read the installation guide before ordering). This amp is ONLY appropriate if you are ONLY needing to boost signal to Verizon 4G LTE devices (it will not affect any other signal!)
  • Coverage area*: 4,000 - 10,000 square feet
  • All-in-One Kit? NO - antennas and cabling are required (sold separately), see above
  • Compatibility: Verizon 4G LTE on the 700mhz frequency only (NOT the AWS band Verizon also uses for LTE in some areas) - this amplifier will NOT work for ANY other networks (not even AT&T LTE - AT&T uses a different portion of the 700mhz frequency for their LTE network)

Do a site survey before buying this amplifier! If you're purchasing this to use in just one location, we strongly recommend doing a site survey first to determine whether the amplifier will help your signal and performance and to give you an idea of what kind of results you can expect from it. Start here: Will an Antenna/Amplifier Help Me?

If your signal is extremely poor (-108db or worse), an amplifier may not help you. There must be some usable signal available for the amplifier to boost for it to be effective.

The 4G LTE 700 from Wilson Electronics is a professional grade signal booster that provides a strong signal and large coverage area for Verizon LTE-capable devices inside a building. This amplifier features adjustable gain controls - one for the uplink (device-to-tower), and another for the downlink (tower-to-device) - allowing the installer to optimize the unit’s gain to match the requirements of the building in which it is deployed. The adjustable gain feature also simplifies installation by making antenna placement less critical.

Providing gain up to 70 dB, the 4G LTE 700 is ideal for multi-story office buildings with weak, unreliable LTE signal. This device supports multiple simultaneous connections, and includes Wilson’s patented oscillation and cell site proximity detection technologies to prevent it from causing interference on the cellular network. The model works with all LTE devices and service providers operating on the 700 MHz network.

How it works: The outside antenna (sold separately) picks up the cellular signal and sends it through a cable (sold separately) to the amplifier. The signal is then boosted and sent through a cable (sold separately) to the inside antenna (sold separately), which rebroadcasts the boosted signal. All of your modems/phones within range of the inside antenna can benefit from the boosted signal wirelessly.


*Many factors will influence the actual coverage area you will see from a repeater, including layout/floorplan, construction, and original un-amplified signal strength. Depending on your situation, you may see more or less coverage than the estimates listed here. It is not possible to guarantee coverage area.



Installation diagram:

not to scale. representative graphic only. amplifier does NOT include cabling or antennas.

Installation notes:

  • In order for your system to function properly, you must maintain adequate separation between the outside and inside antennas (if the antennas are too close together, there will be oscillation/feedback between the antennas and the amplifier will shut down). This amplifier requires approximately 60' of separation between the outside and inside antennas (if you are using an omnidirectional antenna as the outside antenna, you will need more separation than directional antenna users will need). Separation can be horizontal or vertical.
  • If you cannot achieve adequate separation to eliminate oscillation, you can turn down the gain on the amplifier, but that will result in a smaller coverage area from the amplifier.
  • The interior antenna should be at least 10' away from the amplifier.
  • If you are using a panel antenna as the interior antenna, make sure it is aimed AWAY from the outside antenna.
  • For more details, you can download the installation manual (PDF)

Features:

  • Provides a strong, reliable signal even in weak signal areas
  • Separate adjustable gain controls for uplink (device-to-tower) & downlink (tower-to-device)
  • Configurable with a variety of Wilson antennas to fit virtually any building installation
  • FCC type accepted, Industry Canada certificated
  • Supports all LTE-capable devices operating on 700 MHz network

Specifications:

  • Part Number: 801865
  • Frequency: 776 - 787 MHz
  • Gain: 70 dB
  • Max Uplink Power: 740 mw
  • Max Downlink Power: 25 dBm
  • Noise Figure: 3.5 dB nominal
  • Flatness: ±5 dB
  • Antenna Connectors: N female connectors
  • Power Requirements: 110-240 V AC, 50-60 Hz, 10 W
  • Dimensions: 5.7 x 4.2 x 1.5 inch (14.0 x 10.8 x 3.9 cm)
  • Weight: 1.27 lbs (0.544 kg)

Filter Reviews
   Last 2 Weeks (0)   
    100% (1)
    0% (0)
    0% (0)
    0% (0)
    0% (0)
 
  Show Brief Review
  Show 3Gstore Comments
 Last 6 Months (0) 
All Reviews (1)


Only customers who bought this item from 3Gstore can write a review - these are all verified 3Gstore purchases

Date Added: 01/10/2012 by Chris A. (Bristow, VA)
Fantastic. Please see my review of the (Wilson Outdoor Weatherproof Directional Panel Antenna - 301157) for more details. Long story short, I love this aplifier.

If you purchased this item, Login to write a review.
Q & A
Got questions about this product? Here you can view questions that other customers have asked (and the answers!). If you have a question that hasn't been answered below, you may submit a new question and 3Gstore will answer it!
 

Click here to submit a new question

Sort By:

Questions & Answers

Is there a limit on the number of simultaneous users the amplifier can support?
Can I plug the amplifier directly into my device?
How much separation do I need between the two antennas?



Wilson Electronics provides a two-year warranty on all of their products.

We recommend downloading the installation manual (pdf) before ordering.

Purchasing this product gets you access to the following exclusive 3Gstore resources:

801865 Installation Guide


If you already purchased this item from 3Gstore, Log In to the support portal to access these downloads.
Powered by Olark