Please Wait...



weBoost Connect 3G 65db Amplifier Kit with YAGI Antenna - 472205 (Voice/3G) - DISCONTINUED

No Longer Available

Item Number: 5638
Model: 472205

Price:

$399.99


DISCONTINUED ITEM - SCROLL DOWN FOR REPLACEMENT ITEMS

The Connect 3G has been discontinued. See the Connect 4G

weBoost brings you seamless, uninterrupted cellular connectivity in your home or workspace. Your cell phone is an essential part of your life. You depend on it to stay connected to everything important - family, friends, work. The weBoost Connect 3GTM cellular signal booster is a simple, effective solution to maintain continuous communication for all cellular-enabled devices – smartphones, tablets, etc - in your home or workspace.

Installation is straightforward and can be completed with minimal tools. A step-by-step video guides you through connecting two antennas to the booster. The antennas communicate with both cellular devices and the cell tower for the strongest, most powerful signal possible. weBoost amplifies signals to improve coverage—including 3G data— no matter your cellular carrier in the United States. The Connect 3G comfortably handles multiple simultaneous connections across multiple carriers, providing effortless voice and data communications for all users.

How it works: The outside antenna picks up the cellular signal and sends it through the first cable to the amplifier. The signal is then boosted and sent through the second cable to the inside antenna, which rebroadcasts the boosted signal. All of your modems/phones within range of the inside antenna can benefit from the boosted signal wirelessly.


*Many factors will influence the actual coverage area you will see from a repeater, including layout/floorplan, construction, and original un-amplified signal strength. Depending on your situation, you may see more or less coverage than the estimates listed here. It is not possible to guarantee coverage area.



Installation notes:

  • In order for your system to function properly, you must maintain adequate separation between the outside and inside antennas (if the antennas are too close together, there will be oscillation/feedback between the antennas and the amplifier will shut down). This amplifier requires approximately 50' of separation between the outside and inside antennas. Separation can be horizontal or vertical.
  • If you cannot achieve adequate separation to eliminate oscillation, you can turn down the gain on the amplifier, but that will result in a smaller coverage area from the amplifier.
  • The Yagi antenna must be aimed directly at the cell tower - if it is not aimed properly or if there are too many obstructions between it and the cell tower, it will not be effective. If you won't be able to accurately aim the antenna, we recommend buying the kit with the omni antenna instead.
  • The interior antenna should be at least 10' away from the amplifier.
  • Make sure the panel antenna is aimed AWAY from the outside antenna.

Features & Benefits:

  • Stronger cellular signal in your home or workspace
  • Fewer dropped calls and lost connections
  • Faster data downloads
  • Longer battery life – up to 2 hours longer talk time
  • Boosts voice & data signals
  • Works with all US cellular carriers
  • All needed components included in kit
  • Works with virtually all smartphones and mobile hotspots
  • Simple installation

Includes:

  • 65dB 800/1900MHz Amplifier
  • 304475 - 75 Ohm Yagi Outside Antenna
  • 301155 - Wall Mount Panel Antenna
  • 950630 - 30' White RG6 Coax
  • 2 x 950615 - 15' White RG6 Coax
  • 971129 F Barrel Connector (to connect two RG6 cables together to make a longer cable)
  • 859912 AC power supply
  • Instruction manual

Specifications:

  • Part Number: 472205
  • Frequency:
    • BAND 5: 850 MHz
    • BAND 25/2: 1900 MHz
  • Gain: 65 dB
  • Impedance: 75ohms
  • Power Requirements: 110-240 V AC, 50-60 Hz, 8 W
  • Connectors: F-female
  • Dimensions: 6.3 x 4.2 x 1.4 in / 11.0 x 5.2 x 14.3 cm (amplifier)
  • Weight: 0.41 lbs / 0.20 kg (amplifier)

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.


There are currently no product reviews.

If you purchased this item, Login to write a review.
Q & A
Got questions about this product? Here you can view questions that other customers have asked (and the answers!). If you have a question that hasn't been answered below, you may submit a new question and 5Gstore will answer it!
 

Click here to submit a new question


support

Connect 3G Directional Install Guide Download installation guide/manual

Recommended accessories for your weBoost Connect 3G 65db Kit w/ Yagi Antenna (Voice/3G)

 
$34.99
6V DC Power Supply for Wilson/weBoost Amplifiers
 
$24.99
Hardwire Power Harness for 6V Wilson/weBoost Amplifiers - 85 ...


OR

Videos