30 foot LMR400 Ultra-Low-Loss Coaxial Cable (N-male connectors) 952330

This 30' LMR400 ultra low loss cable has N-Male connectors on BOTH ends..

There are a number of applications for this cable, some of which may require special adapters/connectors to connect this cable to your equipment. Several popular uses for this cable, along with information about any connectors needed, are described below. If you aren't sure whether this cable is appropriate for your needs or whether you need additional connectors, please contact us.

• If you are using this cable as an extension for the 32" Omni External Antenna, 21" Omni RV Antenna, or 18" Shorty RV Antenna, you will need the following connectors: a 971108 connector to connect your antenna's cable to this cable, and a 971107 connector to connect this cable to your adapter cable (or to an amplifier).


• If you are using this cable with the 18" Building Mount Antenna or 21" Marine Antenna, you will need the following connectors: a 971108 connector to connect this cable to your antenna, and a 971107 connector to connect this cable to your adapter cable (or to an amplifier).


• This cable is NOT recommended for use with the Booster Antenna or Magnetic Mount Antenna unless the 3-watt Direct-Connect Amplifier is used. Even then, unless you position the antenna in a location that has GREATER SIGNAL to begin with, you may experience too much signal loss. If you do choose to use this cable with one of those antennas, you will need a 971108 connector to connect your antenna's cable to this cable, and a 971107 connector to connect this cable to your adapter cable (or to an amplifier).


• If you are using this cable to connect the 301135 Panel Antenna or 301121 Dome Antenna to the 801245 SoHo amplifier, you will need the 971107 connector to connect this cable to the amplifier (the other side will connect directly to the antenna).


• If you are using this cable to connect the 301208 Desktop Antenna to the 801245 SoHo amplifier, you will need a 971108 connector to connect your antenna's cable to this cable, and a 971107 connector to connect this cable to the amplifier.


• If you are using this cable to connect the Dual-Band Yagi, 1800-1990 MHz Yagi, or 806-939 MHz Yagi to an adapter cable or amplifier, you will need the 971107 connector to connect this cable to the adapter cable or amplifier (the other side will connect directly to the Yagi Antennas).

Signal Loss

• 850MHz Attenuates signal approximately 1.1 dbm
• 1900MHz Attenuates signal approximately 1.7 dbm
• Approximately .5dbm is lost at each connection between 2 cables.
• To prevent excessive signal loss, this extender cable should NOT be daisy chained.
• Find the frequency used in your area here: http://www.wirelessadvisor.com

9913-equivalent cable is thicker than common coax cable. The picture below compares the thickness of this cable to a quarter and a 20oz soda bottle: