Helping You Stay Connected

Consumer Routers

Enterprise Routers

M2M Solutions

Signal Boosters

Antennas

WiFi

Data Cards

Misc

Manufacturer

Solution

Antenna Frequency

Amplifier Solution

Videos By 3Gstore

EVDOinfo.com

3Gstore Blog

3Gstore Resources

Now offering $4.99 Shipping!

(orders over $99 - see details)

75' Black LMR400 Ultra-Low-Loss Cable (N/Male Connectors) This 75' LMR400 ultra low loss cable has N-Male connectors on BOTH ends . There are a number of applications for this cable, some of which may require special adapters/connectors to connect this cable to your equipment. Several popular uses for this cable, along with information about any connectors needed, are described below. If you aren't sure whether this cable is appropriate for your needs or whether you need additional connectors, please contact us . If you are using this cable to connect an antenna with an N/Female connector to an adapter cable or amplifier with an FME/Male connector, you will need a 971107 connector to connect this cable to the adapter cable or amplifier (the other side of the cable will connect directly to the antenna) If you are using this cable as an extension cable for an antenna with an FME/Female-terminated cable, you will need a 971108 connector to connect your antenna's cable to this cable. You will also need a 971107 connector to connect the other side of the cable to the adapter cable or an FME/Male amplifier. If you are using this cable to connect an antenna with an N/Female connector to an amplifier with an N/Female connector, you do not need any adapters. This cable is NOT recommended for use with the Booster Antenna or 12" Magnetic Mount Antenna unless a Direct-Connect Amplifier is used. Even then, unless you position the antenna in a location that has GREATER SIGNAL to begin with, you may experience too much signal loss. If you do choose to use this cable with one of those antennas, you will need a 971108 connector to connect your antenna's cable to this cable, and a 971107 connector to connect this cable to your adapter cable (or to the amplifier). Specifications: Cable length: 75' Connectors: N/Male Cable diameter: 7/16" N/Male connector diameter: 3/4" Impedence: 50ohms Signal Loss: The amount of signal attenuation you'll see depends on which frequency you're using. This cable averages approximately 3.8dB of signal loss. Attenuation for each frequency is below: 700mhz: 2.6dB 800mhz: 2.8dB 1700mhz: 4.1dB 1900mhz: 4.4dB 2100mhz: 4.6dB 2400mhz: 5.0dB 2500mhz: 5.1dB Approximately .5dbm is lost at each connection between 2 cables To prevent excessive signal loss, this cable should NOT be daisy chained with other cables! It is always better to use one longer piece of cable than to screw two shorter cables together.