Please Wait...
Log In

Information and Accessories for UML290 on Verizon

About the UML290

UML290 SIM Type: Standard 2FF



  • 4G LTE Technology
  • Up to 10x Faster than 3G
  • Backwards compatible to 3G
  • Fold-away USB Connector
  • LED Service Indicator
  • Support Microsoft Windows XP, Vista, Windows 7, Windows 8; Mac OSX (10.4.x - 10.9.x only; 10.10 is NOT supported)


  • 4G LTE Mobile Broadband and Mobile Broadband (Rev. A) capable
  • Auto Connect
  • GPS: Not Supported at launch


  • Fold–away, 180° rotating Type A USB connector
  • 4G SIM Card compatible (SIM not included) - standard sized SIM slot
  • VZAccess® Manager for easy connection management
  • Antenna System: Efficient, innovative internal antenna design optimizes data transfer rate and sensitivity to network signals
  • Antenna Connectors for external antennas (sold separately)
  • Service Status Indicator (LED)– 2 Color
  • 2–way Text Messaging capable
  • VPN Compatible; Dial Up; NDIS/LAN Adapter support



  • 3.5" (H) x 1.4" (W) x 0.6" (D)
  • Weight: 1.8 oz
  • SAR = 1.15 W/kg – body

Operating System Support

  • Windows® Vista (32/64–bit)
  • Windows® XP (32–bit) (SP2 or higher)
  • Windows® 7 (32/64–bit)
  • Windows® 8 (32/64–bit)
  • Mac OSX 10.4x - 10.9x
  • MAC OSX WARNING: This modem is NOT compatible with OSX 10.10

System Requirements

  • One Type A USB Port
  • Processor: 150 MHz or higher
  • Disk Drive: CD ROM
  • Memory (RAM) requirement: 64MB
  • Hard disk space requirement : 28.1MB
  • Internet Browser Software

Technology Bands

  • CDMA 1xEV–DO Rev. A/Rev. 0: 800/1900 MHz
  • LTE CDMA (700MHz

Memory / Chipset

  • Qualcomm MDM9600

Antenna Port Location

The antenna port is located on the left side of the rear of the modem beneath the plug with a satellite symbol on it. WARNING: the UML290's port is VERY FRAGILE (moreso than other modems). Be GENTLE when connecting or disconnecting the adapter cable from the antenna port!

Tips For Using Your Antenna/Adapter Cable:

  • Be GENTLE when connecting or disconnecting the adapter cable to/from your modem - the connector pins and the ports themselves can be VERY FRAGILE!!!
  • If the adapter cable feels loose when you connect it to the antenna port, remove it and roll it between your thumb and forefinger while applying medium pressure. The friction and pressure will cause the connectors' "teeth" to tighten up, allowing it to fit more snugly in your device's antenna port.
  • If you're using a magnetic mount antenna, make sure it is connected to something magnetic or it will not work! If you're using an antenna that included radials, make sure the radials are screwed on or it will not be as effective! (other antennas do not require grounding)
Already have an antenna/amplifier and just need the adapter cable?