Please Wait...
Log In

Information and Accessories for Home Phone Connect F256VW on Verizon

About the Home Phone Connect F256VW

Home Phone Connect F256VW


  •  Device Type CDMA personal base station
  • Width 7 in
  • Depth 5 in
  • Height 1.5 in
  • Weight 12 oz

Processor Memory / Storage

  • Processors Installed QUALCOMM QSC6055
  • RAM Installed ( Max ) 16 MB
  • Flash Memory Installed (Max) 64 MB


  •  Form Factor External
  •  Connectivity Technology Wireless
  • Data Link Protocol TTY
  • Status Indicators Battery,
    Signal strength,
  • Features Wall mountable


  • Antenna External detachable
  • Directivity Omni-directional
  • Gain Level 2 dBi


  • Cellular Band CDMA 800/1900

Expansion / Connectivity

  • Interfaces 2 x Phone line - RJ-11,
    1 x Management - 4 pin USB Type A


  • Power Device Power adapter - External
  • Voltage Required AC 120/230 V ( 50/60 Hz )


  • Type Battery pack

Environmental Parameters

  • Min Operating Temperature 14 °F
  • Max Operating Temperature 122 °F

Antenna Port Location

The F256VW Home Phone Connect 2 has an SMA/Female antenna connector. If you are using an antenna with a cable terminated in FME/Female (this is the most common scenario), attach the 971119 FME/Male to SMA/Male connector onto the end of your antenna cable and then you will be able to screw your cable into the Home Phone Connect. If you are using a cable with an N/Male connector, you will either need TWO connectors (N/Female to FME/Female and then FME/Male to SMA/Male) OR you can use the RSA-3452 N/Female to SMA/Male connector.
Already have an antenna/amplifier and just need the adapter cable?