Please Wait...
Log In

Information and Accessories for Beam (AC340U) on AT&T

About the Beam (AC340U)

Beam (AC340U) SIM Type: Standard 2FF
USB Device (USB port)
FDD LTE Category 3
Chipset – Qualcomm MDM 9215 and WTR1605L
LTE 700/AWS w/ 2x2 MIMO
UMTS 850/1900/2100 MHz w/ Type 3i Rx Diversity
GPRS EDGE Class 10/12, 850/900/1800/1900
Wi-Fi 802.11b/g/n
Other Features
LCD screen for device status
Assisted and Standalone GPS support
Expandable memory Slot that supports microSD™ cards up to 32GB
AirCard Watcher software
1.97" L (50 mm) x 2.58" W (65.5 mm) x 0.46" H (11.7 mm)
1.91 oz (54g)
Antenna Diversity Support
2X2 MIMO antenna for LTE
Operating temperature: 0 to 35° Celsius
Storage temperature: -40 to 85° Celsius
RoHs compliant
Personal Computer Requirements
USB port (2.0 recommended)
Web browser may be required for initial setup
OS Support (Drivers and SDK)
Windows® 8, 7, Vista®, or XP (32 and 64bit) Mac OS® 10.6 and newer Ubuntu Linux 9.04
Package Contents
NETGEAR AirCard® 340U USB Mobile Broadband Modem
USB cable
Laptop screen clip
Quick Start Guide

Antenna Port Location

Connect the antenna to port 1, located beneath a cover on the left side of the top of the modem

Tips For Using Your Antenna/Adapter Cable:

  • Be GENTLE when connecting or disconnecting the adapter cable to/from your modem - the connector pins and the ports themselves can be VERY FRAGILE!!!
  • If the adapter cable feels loose when you connect it to the antenna port, remove it and roll it back and forth between your thumb and forefinger while applying medium pressure. The friction and pressure will cause the connectors' "teeth" to tighten up, allowing it to fit more snugly in your device's antenna port.
  • If you're using a magnetic mount antenna, make sure it is connected to something magnetic or it will not work! If you're using an antenna that included radials, make sure the radials are screwed on or it will not be as effective! (other antennas do not require grounding)
Purchase Netgear 340U (USBConnect Beam) for AT&T - Refurbished, Like New. Already have an antenna/amplifier and just need the adapter cable?