Please Wait...
Log In

Wilson AG Pro 70db Wireless Amplifier - 801265 [800/1900mhz] - DISCONTINUED

No Longer Available

Item Number: 3030



Sales Tax (?):

$0.00 tax collected outside of Illinois


This amplifier has been discontinued. Please see our other wireless amplifiers.

Fast Facts About This Product:

  • This amplifier is best for: users looking for a powerful wireless amplifier to provide boosted signal to multiple devices in a large home/office and have the space to accommodate significant separation between the antennas (60' of separation between the external and internal antennas is recommended); this amplifier is particularly good for folks who want to use RG6 cabling.
  • Coverage area*: 4,000 - 10,000 square feet
  • All-in-One Kit? NO - antennas and cabling are required (sold separately)
  • Compatibility: 800mhz/1900mhz networks, which are used by most 2G (voice) and 3G networks in the USA, including:
    • Verizon 2G/3G
    • Sprint 2G/3G
    • AT&T 2G/3G and HSPA+ (which shows up on your device as "4G" - NOT LTE)
    • T-Mobile and Cricket voice only
    • Does NOT work with LTE for any carrier or AWS (T-Mobile 3G/4G)

IMPORTANT SIGNAL INFORMATION: If you're purchasing an amplifier for use at one specific location, we strongly recommend doing a site survey first to determine whether the amplifier will help you and to give you an idea of what kind of results you can expect from it.

If your signal is extremely poor (-108db or worse), an amplifier may not be effective - there must be some usable signal available for the amplifier to boost. Conversely, if the signal is too STRONG at your location (-50db or better), the amplifier may shut down to avoid interference with the tower.

The AG Pro 70 utilizes RG-6 coax cable, which is pre-wired in many homes, making this perfect if you've got existing coax run through your home. With higher gain than the DB Pro and a lower price point than the AG Pro 75, this model is an ideal commercial or large residential booster. The unit delivers a maximum gain of 70 dB at 1900 MHz and 65 dB at 800 MHz. The product includes Wilson’s patented technologies to prevent cellular network interference.

How it works: The outside antenna (sold separately) picks up the cellular signal and sends it through a cable (sold separately) to the amplifier. The signal is then boosted and sent through a cable (sold separately) to the inside antenna (sold separately), which rebroadcasts the boosted signal. All of your modems/phones within range of the inside antenna can benefit from the boosted signal wirelessly.

*Many factors will influence the actual coverage area you will see from a repeater, including layout/floorplan, construction, and original un-amplified signal strength. Depending on your situation, you may see more or less coverage than the estimates listed here. It is not possible to guarantee coverage area.

Installation diagram:

not to scale. representative graphic only. amplifier does NOT include cabling or antennas.

Installation notes:

  • In order for your system to function properly, you must maintain adequate separation between the outside and inside antennas (if the antennas are too close together, there will be oscillation/feedback between the antennas and the amplifier will shut down). This amplifier requires approximately 60' of separation between the outside and inside antennas (if you are using an omnidirectional antenna as the outside antenna, you will need more separation than directional antenna users will need). Separation can be horizontal or vertical.
  • If you cannot achieve adequate separation to eliminate oscillation, you can turn down the gain on the amplifier, but that will result in a smaller coverage area from the amplifier.
  • The interior antenna should be at least 10' away from the amplifier.
  • If you are using a panel antenna as the interior antenna, make sure it is aimed AWAY from the outside antenna.
  • For more details, you can download the installation manual (PDF)

Features & Benefits:

  • 2011 - Mark of Excellence Award - Consumer Electronics Association
  • Oscillation protection
  • Significantly improves voice and data signal quality
  • Has up to 10 times more power than your cell phone or laptop cellular data card
  • Extends cell phone battery life
  • Made in the USA
  • Up to 10 times more powerful than your cell phone
  • Wireless operation -- no physical connection to cell phones or modems needed
  • Supports multiple phones, data cards simultaneously
  • Attractive, sleek design
  • Automatic overload/oscillation protection


  • Part Number: 801265
  • Frequency: 824-894 MHz / 1850-1990 MHz
  • Gain: 65 dB at 800 Mhz / 70 dB at 1900Mhz
  • Max Output Power: 3 watts
  • Max RF (up/down): 30.8 dBm / 26.0 dBm
  • Noise Figure: 3.5 dB nominal
  • Antenna Connectors: F - female connectors
  • isolation: > 90 dB
  • Power Requirements: 120-240 V AC, 50-60 Hz, 8 W max
  • Connectors: F-female
  • Dimensions: 5.7 x 4.2 x 1.5 (inch) / 15.7 x 10.7 x 3.8 (cm)
  • Weight: 0.64 lbs / 0.29 kg

There are currently no product reviews.

If you purchased this item, Login to write a review.
Q & A
Got questions about this product? Here you can view questions that other customers have asked (and the answers!). If you have a question that hasn't been answered below, you may submit a new question and 3Gstore will answer it!

Click here to submit a new question

Sort By:

Questions & Answers

We recommend downloading the Complete Installation Guide (pdf) before ordering.

Wilson AG amplifier guide Download installation guide/manual