This 5' RG-58 cable has an FME/Male connector on one side and an FME/Female connector on the other.
Depending on your setup, you may need special adapters/connectors to connect this cable to your equipment. If you aren't sure whether this cable is appropriate for your needs or whether you need additional connectors, please contact us.
- Cable length: 5'
- Connectors: FME/Female and FME/Male
- Impedence: 50ohms
- Cable diameter: 3/16"
- The amount of signal attenuation you'll see depends on which frequency you're using. This cable averages approximately 1dB of signal loss. Attenuation for each frequency is below:
- 700mhz: .6dB
- 800mhz: .7dB
- 1700mhz: 1dB
- 1900mhz: 1.1dB
- 2100mhz: 1.1dB
- 2400mhz: 1.2dB
- 2500mhz: 1.3dB
- Approximately .5dbm is lost at each connection between 2 cables
- To prevent excessive signal loss, this cable should NOT be daisy chained with other cables! It is always better to use one longer piece of cable than to screw two shorter cables together.