This item ships from an alternate location - shipping may be delayed. Contact us before ordering if you need a more exact ETA.
Fast Facts about this Product:
- This repeater kit is best for: Users who need to provide in-vehicle amplified cellular signal to 2 to 3 cellular modems or phones in close proximity to the included "candy bar" antenna.
- Coverage area*: 3-10' (e.g. front seat area of a vehicle)
- All-in-One Kit? YES
- Compatibility: 800mhz/1900mhz networks, which are used by most 2G (voice) and 3G networks in the USA, including:
- Verizon 2G/3G
- Sprint 2G/3G
- AT&T 2G/3G and HSPA+ (which shows up on your device as "4G" - NOT LTE)
- T-Mobile and Cricket voice only
- Does NOT work with LTE for any carrier or AWS (T-Mobile 3G/4G)
IMPORTANT SIGNAL INFORMATION: If you're purchasing an amplifier for use at one specific location, we strongly recommend doing a site survey first to determine whether the amplifier will help you and to give you an idea of what kind of results you can expect from it.
If your signal is extremely poor (-108db or worse), an amplifier may not be effective - there must be some usable signal available for the amplifier to boost. Conversely, if the signal is too STRONG at your location (-50db or better), the amplifier may shut down to avoid interference with the tower.
weBoost brings seamless, uninterrupted cellular connectivity for everyone in your vehicle. Cell phones are an essential part of our lives – especially when we’re on the go.
Whether around town or on a long road trip, the weBoost Drive 3G-MTM cellular signal booster is a simple, effective solution to maintain continuous communication for all cellular-enabled devices – smartphones, tablets, etc - in your car, truck, van or RV. Installation is easy - no tools needed. A step-by-step video guides you through the process. No special tuning or alignment is required. weBoost amplifies signals to improve coverage—including 3G data— no matter your cellular carrier in the United States and Canada. The Drive 3G-M comfortably handles multiple simultaneous connections across multiple carriers, providing effortless voice and data communications for all users.
How it works: The outside antenna picks up the cellular signal and sends it to the amplifier. The signal is then boosted and sent out through the low-profile interior antenna, which rebroadcasts the boosted signal. All of your modems/phones within range of the inside antenna can benefit from the boosted signal wirelessly.
*Many factors will influence the actual coverage area you will see from a repeater, including layout/floorplan, construction, and original un-amplified signal strength. Depending on your situation, you may see more or less coverage than the estimates listed here. It is not possible to guarantee coverage area.