Please Wait...
Log In

weBoost eqo Plug-and-Play Repeater Kit

In Stock

Item Number: 6494



Sales Tax (?):

$0.00 tax collected outside of Illinois

A surge protector goes in between your outside antenna and the amplifier and protects your amplifier if lightning strikes your antenna. It's not required but is recommended for users in areas where lightning strikes frequently.
Add Lightning Protection (optional) - details

Fast Facts About This Product:

  • This repeater kit is best for: users looking for an easy plug-and-play option to boost 3G and 4G that doesn't require extensive installation.
  • Coverage area*: up to 1,000 square feet
  • All-in-One Kit? YES
  • Compatibility: This amplifier supports 700mhz/800mhz/1700mhz/1900mhz/2100mhz networks (which includes most 2G, 3G, and 4G providers in the US). Supported carriers/networks include:
    • Verizon 2G/3G/4G/AWS
    • Sprint 2G/3G/4G LTE (gain is minimal for Sprint 4G LTE, and only on the 1900mhz band. This amplifier does not support Sprint's 2500mhz LTE band)
    • AT&T 2G/3G/4G/LTE
    • US Cellular 2G/3G/4G
    • T-Mobile 3G/4G
    • MetroPCS 3G/4G
    • For other carriers, confirm which frequency your provider is using and make sure this amplifier supports it before purchasing! Contact us if you need any assistance.

IMPORTANT SIGNAL INFORMATION: If you're purchasing an amplifier for use at one specific location, we strongly recommend doing a site survey first to determine whether the amplifier will help you and to give you an idea of what kind of results you can expect from it.

If your signal is extremely poor (-108db or worse), an amplifier may not be effective - there must be some usable signal available for the amplifier to boost. Conversely, if the signal is too STRONG at your location (-50db or better), the amplifier may shut down to avoid interference with the tower.

The new eqo provides consumers with a simple plug-and-play solution to solve the complex challenge of boosting and increasing the reliability of spotty in-home or small-office cellular connections. Working across all major U.S. and Canadian carrier networks, the eqo includes two parts that can be set up in under a minute – a discrete, stylish signal booster and an antenna to send that signal throughout the home. Simply place the eqo Booster in an area where signal is available, plug it into an electrical outlet and connect the antenna, then watch the signal improve. eqo changes the game for cell signal boosting with its simplicity, design and performance – ultimately allowing consumers to take control of their cellular network – regardless of their carrier – and simplifying the installation in relation to other signal boosters by eliminating the need to mount external antennas.

From homes to small businesses, the eqo Booster amplifies any existing signal within the space to provide a constant, strong connection for areas up to 1,200 square feet (i.e. 1-2 rooms). It can take an outdoor cell signal and “echos” that signal into the home - resulting in more reliable connections, faster broadband speeds, seamless document downloads, longer battery life and an overall boosted signal for 3G and 4G services.

*Many factors will influence the actual coverage area you will see from a repeater, including layout/floorplan, construction, and original un-amplified signal strength. Depending on your situation, you may see more or less coverage than the estimates listed here. It is not possible to guarantee coverage area.

Installation notes:

  • The amplifier with built-in antenna should be installed in a window on the side of the building with the best coverage.
  • In order for your system to function properly, you must maintain adequate separation between the outside and inside antennas (if the antennas are too close together, there will be oscillation/feedback between the antennas and the amplifier will shut down). This amplifier requires approximately 30' of separation between the outside and inside antennas. Separation can be horizontal or vertical.
  • If you cannot achieve adequate separation to eliminate oscillation, the amplifier will adjust to dial down the gain, but that will result in a smaller coverage area from the amplifier.


  • Model: 473120
  • FCC ID: PWO460032
  • IC: 4726A-460032
  • Frequency:
    • BAND 12/17: 700 MHz
    • BAND 13: 700 MHz
    • BAND 5: 850 MHz
    • BAND 4: 1700/2100 MHz
    • BAND 2: 1900 MHz
  • Gain: 62 dB
  • Impedance: 50ohms
  • Power Requirements: 5V/2.5A
  • Connectors: SMA-Female
  • Noise Figure: 5db nominal
  • Isolation: > 110 dB

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.

There are currently no product reviews.

If you purchased this item, Login to write a review.
Q & A
Got questions about this product? Here you can view questions that other customers have asked (and the answers!). If you have a question that hasn't been answered below, you may submit a new question and 3Gstore will answer it!

Click here to submit a new question

Sort By:

Questions & Answers


weBoost Eqo User Manual Download installation guide/manual
weBoost Eqo Quick Install Guide Download installation guide/manual