Please Wait...



SureCall Fusion2Go 3.0 Vehicle Repeater Kit w/ Mag Mount Antenna

Call for Availability

Item Number: 8260
Model: SC-Fusion2go3
Quantity:

Price:

$399.99

This is a special-order item that requires additional lead time. Contact us before ordering if you need a more exact ETA.

The SureCall Fusion2Go 3.0 is the newest generation in a line of in-vehicle signal boosters that has kept drivers and riders connected in areas with critically low cellular signal strength. This cell phone signal vehicle booster kit is purpose-built for mobile users who often find themselves on the edge of their cellular network. It comes with a mag mount outdoor antenna designed to go on the roof of a car, truck or SUV. This low-profile antenna installs quickly with no drilling or cutting needed. An in-vehicle candy bar wide-band antenna broadcasts the boosted signal to the driver and passengers.

A good vehicle signal repeater kit will amplify any US cell signal in low-coverage areas for better 2G/3G/4G LTE performance. With a SureCall Fusion2Go 3.0, vehicle occupants can make or receive calls, check email and receive alerts even when they’ve traveled to the fringes of their network. The bi-directional booster increases signal in both directions for better speeds and reliability. Everything is included to get your car cellular booster kit working in minutes.

Repeater Kit Features:

  • Coverage area*: 3-10' (e.g. front seat area of a vehicle)
  • All-in-One Kit? YES
  • Compatibility: This amplifier supports 700mhz/800mhz/1700mhz/1900mhz/2100mhz networks (which includes most 2G, 3G, and 4G providers in the US). Supported carriers/networks include:
    • Verizon 2G/3G/4G/AWS
    • Sprint 2G/3G/4G - 4G LTE will only be improved where Sprint is using the 1900mhz band. This amplifier does NOT support Sprint's 2500mhz LTE band
    • AT&T 2G/3G/4G/LTE
    • US Cellular 2G/3G/4G
    • T-Mobile 2G/3G/4G
    • MetroPCS 2G/3G/4G
    • For other carriers, confirm which frequency your provider is using and make sure this amplifier supports it before purchasing! Contact us if you need any assistance.


Installation notes:

  • In order for your system to function properly, you must maintain adequate separation between the outside and inside antennas (if the antennas are too close together, there will be oscillation/feedback between the antennas and the amplifier will shut down). This amplifier requires approximately 5' of separation between the outside and inside antennas. Separation can be horizontal or vertical.
  • The magnetic mount antenna MUST be connected to something magnetic or it will not work! A suction cup window mount, which provides a magnetic base for the antenna, is available separately if needed.
  • The inside antenna should be mounted within a couple of feet of where boosted signal is needed. In a typical vehicle, the best place to mount the inside antenna is shoulder height on the side of the drivers seat. Remember, the closer your phone is to the interior antenna, the better the performance.
  • Do not mount the interior antenna within 4" of metal.
  • You CANNOT use a traditional adapter cable that plugs directly into an antenna port on a phone/modem with this amplifier - doing so will damage your device! If you want a direct connect amplifier, see our direct connect options

Features & Benefits:

  • Most powerful in-vehicle signal booster for voice, text and 4G LTE data for all US carriers    
  • Reduces dropped & missed calls and improves 4G LTE data performance inside any car or truck    
  • Supports multiple users simultaneously   
  •  Improves data speeds and connectivity for more miles of uninterrupted service in remote areas     
  • Set up in minutes - Everything included for simplified install

Package Includes:

  • Fusion2Go 3.0 Booster
  • 5dBi wide band magnetic mount antenna
  • Wide band patch antenna with 9'8” cord
  • DC power adapter with 6’ cable

Specifications

  • Uplink Frequency Range: 698–716 / 776–787 / 824–849 / 1850–1915 / 1710–1755 MHz
  • Downlink Frequency Range: 728–746 / 746–757 / 869–894 / 1930–1995 / 2110–2155 MHz
  • Standards Supported: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, 4G & all cellular standards
  • Maximum Gain: 50dB
  • Gain Adjustment: 20 dB (Automatic)
  • DC Power: 6-16V
  • Impedance: 50ohms
  • Noise Figure: Maximum 5 dB
  • VSWR: Less than 2:1
  • Max Output Power: 1 Watt / 3 Watt EIRP
  • Power Consumption: <10W
  • RF Connectors: FME Male on both sides
  • Operating Temperature: -4F to +158F
  • Dimensions: 5.625 x 4 x 1.125 inches (amplifier)
  • Weight: 1.43 lbs (amplifier)
  • FCC/IC ID: RSNF2GO / 7784A-F2GO (amplifier)

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.

Filter Reviews
   Last 2 Weeks (0)   
    60% (3)
    40% (2)
    0% (0)
    0% (0)
    0% (0)
 
  Show Brief Review
  Show 5Gstore Comments
 Last 6 Months (0) 
All Reviews (5)


Only customers who bought this item from 5Gstore can write a review - these are all verified 5Gstore purchases

Date Added: 06/07/2019 by Daren G. (EUREKA SPRINGS, AR)
fairly simple installation, definitely improves signal strength in rural 4G areas

Date Added: 09/11/2018 by Bradley C. (Middlesboro, KY)
1

Date Added: 09/06/2018 by Bradley C. (Middlesboro, KY)
Works great, had service in areas where I didn't before, you need to be 1 foot away from it to work well

Date Added: 07/30/2018 by Sheri L. (LUPTON, MI)
Product worked as advertised. Easy to set up and increased our signal. Very happy with item.

Date Added: 06/07/2018 by Curt S. (San Rafeal, CA)
Haven't used the product yet but the sales staff is absolutely the best

If you purchased this item, Login to write a review.
Q & A
Got questions about this product? Here you can view questions that other customers have asked (and the answers!). If you have a question that hasn't been answered below, you may submit a new question and 5Gstore will answer it!
 

Click here to submit a new question

Sort By:

Does the SureCall Fusion2Go 3.0 support LTE?

Yes, this amplifier supports LTE on 700mhz/800mhz/1700mhz/1900mhz/2100mhz bands, which includes all major 4G LTE providers in the US.

Does the SureCall Fusion2Go 3.0 support all mobile operators?

This amplifier supports 700mhz/800mhz/1700mhz/1900mhz/2100mhz networks (which includes most 2G, 3G, and 4G providers in the US).