The weBoost Connect RV 65 cellular signal booster is a simple, effective solution to significantly improve the cellular signal strength within any RV. This mobile signal booster system provides a benefit for all users on all cellular-enabled devices on all carriers while in your parked vehicle. By using the Connect 65 from weBoost, you can stay connected to receive important messages or updates, even when you’re far away from home.
Included in the RV repeater kit is a telescoping pole that can extend up to 25 feet tall. This allows the outside directional cellular antenna to maximize the signal from the nearest cell tower. Initial installation of the weBoost Connect 65 for RV takes approximately 30 minutes. Once you’ve done this, only 10 minutes are needed to set up and take down the pole and outside antenna whenever you’re parked. Note that this repeater is not designed to be used when your RV is in motion.
The Connect RV 65 uses a powerful 5-band cellular signal booster to provide maximum signal inside your RV. If you have any sort of signal, this repeater will increase it, making signal more usable even when used in weak cell phone signal areas. weBoost cellular signal boosters improve data speeds as well — including 4G LTE — on most cellular carriers in the United States. The Connect RV 65 comfortably handles multiple simultaneous connections across multiple carriers, providing effortless cellular voice and data communications for all users.
weBoost’s Connect RV 65 Repeater Kit comes with a two-year manufacturer’s warranty. You’ll also receive a year of free technical support from 3GStore.com, which includes a full installation guide in our support portal. Use it to stay connected to the world whenever you’ve reached your weekend getaway destination.
- Coverage area*: up to 1,000 square feet
- All-in-One Kit? YES
- Compatibility: This amplifier supports 700mhz/800mhz/1700mhz/1900mhz/2100mhz networks (which includes most 2G, 3G, and 4G providers in the US). Supported carriers/networks include:
- Verizon 2G/3G/4G/AWS
- Sprint 2G/3G/4G LTE (NOTE: improvement for Sprint LTE is minimal in areas using the upper portion of Sprint's frequency)
- AT&T 2G/3G/4G/LTE
- US Cellular 2G/3G/4G
- T-Mobile 3G/4G
- MetroPCS 3G/4G
- For other carriers, confirm which frequency your provider is using and make sure this antenna supports it before purchasing! Contact us if you need any assistance.
IMPORTANT SIGNAL INFORMATION: If you're purchasing an amplifier for use at one specific location, we strongly recommend doing a site survey first to determine whether the amplifier will help you and to give you an idea of what kind of results you can expect from it.
If your signal is extremely poor (-108db or worse), an amplifier may not be effective - there must be some usable signal available for the amplifier to boost. Conversely, if the signal is too STRONG at your location (-50db or better), the amplifier may shut down to avoid interference with the tower.
How it works: The outside antenna picks up the cellular signal and sends it through the first cable to the amplifier. The signal is then boosted and sent through the second cable to the inside antenna, which rebroadcasts the boosted signal. All of your modems/phones within range of the inside antenna can benefit from the boosted signal wirelessly.
*Many factors will influence the actual coverage area you will see from a repeater, including layout/floorplan, construction, and original un-amplified signal strength. Depending on your situation, you may see more or less coverage than the estimates listed here. It is not possible to guarantee coverage area.